Cloud Electronics RL-1MB User Manual
Page 12
RL Series and RSL Series Installation Guide v2.0
12
RSL Series plates:
When adding RSL-4 Series or RSL-6 Series remote control plates, it will
generally be necessary to disable both the front panel music level and source
selection controls, so that full control is via the plate. On most units, this can
be done by operating a rear panel push-button switch.
IMPORTANT: With both types of plate, it is essential that installers check
the Installation Guide for the specific product to which they are connecting
the plates. This will give full details of the configuration procedure. If necessary,
Installation Guides for all products can be found at
.
On multi-channel (or multi-zone) devices, the configuration changes necessary
for remote control are always per-channel or per-zone. Channels (or zones)
to which remote control plates are not fitted will operate from the unit’s local
controls in the normal way.