Cloud Electronics PM1 - Manual (Page 8)

PM1 Installation and User Guide v1.0 8
Using the PM - Recommendations for use
To the installer: please photocopy this section and leave with the customer.
Making an announcement
1. To start announcing, press and hold down the TALK button.
2. Make the announcement.
3. When the announcement is finished, release the TALK button.
General Dos and Don’ts
Think what you need to say before making the announcement.
•
Speak slowly and clearly in a normal speaking voice.
•
Don’t “swallow” the microphone; unless you are in a particularly noisy
•
environment your mouth need be no closer than 4 - 5 inches (10 – 12 cm) from
the mic.
Don’t start speaking before you press the TALK button, and then also wait
•
for any pre-announcement chime which the audio system might produce has
sounded in full before starting.
Don’t release the TALK button until the announcement is finished.
•
Don’t twist the gooseneck into odd shapes – it isn’t a toy!
•