CHIAYO SDR-5216 - Manual (Page 6)

6
Battery Installation
SQ-5016 microphone requires 2 pieces of " AA " size batteries
to operate. Please insert the batteries according to the correct
polarity as indicated.
50 16
Microphone capsule module
Battery status LED
ON/OFF switch
LCD
Battery compartment
Rotating protective cap for controls
(also serves as color identification cap)
Caution
Many batteries are known to have leakage problem of conductive and corrosive liquid.
Please remove the batteries if they are not to be used for a long period.
Due to various unstandardized sizes ( diameters ) of " AA " batteries, this battery
compartment is designed to accommodate the most common Alkaline batteries only.
Changing the capsule
First unscrew the metal grill from the housing, take out the capsule and then replace it with
a new one. Either dynamic or condenser type can be chosen to fit your requirement for any
application.
Lock / Unlock
Set
Up
Down
Charging port
Name plate
Parts and functions Parts and functions
Making changes to various settings in SQ-5016
1.Making changes to Channel:
Use UP or DOWN button to go to the CHANNEL/ FREQUENCY page. The cursor will flash
to allow changes to be made. Pressing UP or DOWN button will increase or decrease the
channel number. The corresponding frequency will change accordingly. When a desired
channel is selected, it will be automatically saved and stored in the memory.
3. Making changes to Sensitivity Level:
Use UP or DOWN button to go to the SENS SET page.
Press UP or DOWN button to increase or decrease the Sensitivity Level of the transmitter.
The MAX level is 4 and the MIN level is 1.
When a desired sensitivity level has been selected for your application, it will be
automatically saved and stored in the Memory.
Remark : When selecting Sensitivity level, please keep in mind that Level 1 is for
close proximity singing purposes whereas Level 4 is for use of transmitter on
tripod mount for speech purposes. When Level 4 setting is used for close
proximity singing, high SPL input will result in undesirable distortion in the
output.
After performing setting changes, you could turn the protective cover 180° in either
direction to block the buttons from being accidentally adjusted.
2. Making changes to Battery selection:
Use UP or DOWN button to go to the Battery selection page.
Press UP or DOWN button to move the cursor to either NiMH ( rechargeable battery ) or
AKLN ( Alkaline battery ) position.
When the desired battery has been selected, it will be automatically saved and stored in the
memory.
Remark : "NiMH" must be selected when rechargeable battery is being
used. Never select "AKLN" ( Alkaline ) when transmitter is intended for
charging as Alkaline battery can not be charged ! Wrong selection of
battery will cause battery sensing electronics to display wrong information
and mislead charging status.
UHF HANDHELD TRANSMITTER SQ-5016