ChamSys SnakeSys - Manual (Page 38)

SnakeSys User Manual 32 / 44
Menu Item Function
ArtNet IP 1 Used to set the main R8 network IP address used by the R8
processor. If the unit is placed into Art-Net mode then this
IP is used for Art-Poll-Reply / Art-Net DMX network data
on ports 1 through 4. The main IP address is automatically
chosen when the R8 units default settings are applied,
however sometimes it is necessary to change the address.
This is an advanced option.
ArtNet IP 2 Secondary IP address used only in Art-Net mode for
Art-Poll-Reply / Art-Net. DMX network data on ports 5
through 8. The secondary IP address is automatically
chosen when the R8 units default settings are applied,
however sometimes it is necessary to change the address.
This is an advanced option.
Subnet Mask This is an advanced option, The default subnet mask is
normally 255.0.0.0
Default Used to restore default networking settings to the R8.