ChamSys SnakeSys - Manual (Page 16)

SnakeSys User Manual 10 / 44
3.1 Product Diagram
3.2 Network Buttons
• CHAMNET
Enables ChamNet mode for use with MagicQ console, or disables ChamNet mode where local control mode will be used instead.
• VPN
Enables VPN (VLAN) mode, which is used to connect two R4 units together and create a virtual private network. Connect a
network cable between NET4 on both units and enable the VLAN with the VPN button and the LED will illuminate. NET1,
NET2 and NET3 and NET5 will each become a separate VPN on both units.
Table 3.1: VPN (VLAN) Connectivity:
Unit #1 NET Port Unit #2 NET Port Connection
NET1 NET1 Virtual LAN (Port to Port)
NET2 NET2 Virtual LAN (Port to Port)
NET3 NET3 Virtual LAN (Port to Port)
NET5 NET5 Virtual LAN (Port to Port)
Note
Each of the network connectors will behave as separate networks.
When in VPN Mode, NET5 is still linked to the processor on each of the R4 units. Using NET5 on either one of the two units
will allow both of the units to be accessed.
3.3 DMX Mode Buttons
• IN / OUT