Daewoo DHD-4000D - Manual (Page 46)

45
DVD
PART
About MP3, JPEG discs
PLAY and PAUSE
Press the [PLAY] or [PAUSE] button toggle between those functions.
Search for a track
The [SEARCH] button works on MP3/JPEG discs as well as VCD/CD audio.
* If the [SEARCH] button is pressed in playback mode the folder tree view will disappear to be replaced by the search bar.
To stop playback
Press the [STOP] button.
To skip to the next or previous file
• Press the [NEXT √√ ] button of the remote control briefly while playing, to skip ahead to the beginning of
the next file. Each time you press the button consecutively, the beginning of the next file is located and
played back.
• Press the [œœ LAST] button of the remote control briefly while playing, to skip back to the beginning of the
previous file. Each time you press the button consecutively, the beginning of the previous file is located and
played back.
The ability of this unit to read MP3 discs is dependent on the following:
• The Bit Rate must in the range of 64-256 kpbs.
• The maximum number of directories should not exceed 32.
• The maximum depth level of directories should not exceed 4.
• In case of the file that is recorded with the variable bit rate (VBR) in one file (Example : 54~256kbps) occurrence of the
sound breaking may happen during the playback.
• File names should be named using 8 or fewer letters and/or numbers, and must incorporate the “MP3” file extension.
EXAMPLE: ******** . MP3 where each * is a letter or number.
• Use only letters and/ or numbers in file names. If you use special characters, the file and/ or folder names may not be
displayed correctly on the on-screen display.
The ability of this unit to read JPEG discs is dependent on the following:
• If you press the [PLAY] button instead of [ENTER] in JPEG image, the slide show will begin at the current image.
• To stop the slide show, press the [STOP] button. By pressing the [STOP] and [PLAY] button, you can start the slide show
from the first JPEG image.
Cautions
• Don’t use the CD-RW (Rewritable) disc if possible because it can not be played back.
• The CD-R must be recorded with the standard format because it can not be played back according to the recording
format.
• The CD-R should be written using the ‘disc at once’ method.
• The disc which is made using the IS0 9660 format can be Played back.
DH-A61D1D-LS(GB)_DESUK 03.7.27 11:45 PM ˘ ` 45