Directed Electronics 50.7X - Manual (Page 35)

35 © 2008 Directed Electronics. All rights reserved.
Remote control feature programming
The Responder LC 2-way remote control has menus for configuring the
remote control user features and for programming the remote to the
system control module.
Before you start make sure the keypad is unlocked. (See page 14)
To program the remote user features:
Press and hold the
A U X
button on the remote for about 8 seconds. (ignore
the car indicator at 3 seconds). The status screen clears and “Main
Menu” is displayed in the text display area of the screen.
Release the
A U X
button to display the remote options menu.
Remote options menu
Options Description
Remote Setup Allows feature programming of the remote
Sensor Adjust Adjusts the onboard impact sensor
Pair Remote Sets up remote for programming to the system
Demo mode Places remote in demo mode
Exit Exits programming
Press the
AUX
button to scroll up the Main Menu.
Press the
AUX
button to scroll down the Main Menu.
From the Main Menu, once a feature name is displayed in the text