Dynex DX-CRCF12 - Manual (Page 6)

6
Using your card reader
5 Double-click the DriverInstaller file.
6 Click Install to install the card reader driver.
7 After the driver installation is complete, restart your
computer.
Using your card reader
To use a media card:
1 Insert your memory card into the appropriate slot, as
shown in the table on page 7.
Caution: Cards must be inserted into the correct slot and in the correct direction.
Otherwise you may damage the card or the slot.
2 Open the My Computer or Windows Explorer window, then
double-click the drive icon for the slot you are using.
3 To access files and folders on the inserted card, use normal
Windows procedures for opening, copying, pasting, or
deleting files and folders .
4 When you have finished working with the files on a
memory card, right-click the memory card icon, then select
Eject. The light on the memory card reader must be OFF
before the card is removed.
Caution: Do not remove memory cards while the data LED on the reader is
flashing or blinking.
DX-CRCF12_07-261 - combined.fm Page 6 Monday, July 2, 2007 3:51 PM