Care and cleaning, Maintenance, Warning – Dacor MILLENNIA DHW482 User Manual

Page 8

background image

6

Once the lens retaining ring and lens are

3.

removed, pull the old bulb

C

sideways, out of

the socket.

Using a glove, insert the new bulb into the

4.

socket. Line up the prongs on the new light blub

with the holes in the light socket. Gently push in

on the new bulb until it stops.
Center the lens

5.

D

on the lens retaining ring

B

and snap it back into place on the light

fixture

A

.

Turn on the main power switch. Touch the light

6.

key to make sure it is working.

Replacement Parts

Dacor Part

Number

Description

106660

Halogen light bulb

101952

Filter

A302

Stainless steel cleaner

A300

Cooktop cleaning creme

For replacement parts, contact your Dacor dealer

or visit www.everythingdacor.com.

Care and Cleaning

Maintenance

Light bulb Replacement

WARNING

To prevent electric shock turn off power at the fuse

or junction box before replacing a light bulb.
To avoid personal injury, make sure the cooktop

or range, the hood and the light are cool before

changing a light bulb.

Light bulb replacement is considered to be a hom-

eowner maintenance operation. If all of the lights

do not work, before replacing any bulbs, check to

make sure power is on at the circuit breaker panel

or fuse box.
Replace the light bulb only with Dacor Part No.

106660. See Replacement Parts for ordering

information.

IMPORTANT:

Do not touch the replacement halogen light bulb

with your fingers. Halogen bulbs are sensitive to

the oils from your hand. The oils from your hand

will stick to the bulb and cause it to burn out

faster than normal.
Do not pry out the entire light fixture

A

, when

replacing the light bulb. It is difficult to reinstall.

Pry out only the the lens retaining ring

B

, which

is the inner metal ring attached to the light fix-

ture.

Light bulb Replacement Instructions

Turn off the main power switch. See page 3 for

1.

the location.
Hold the lens retaining ring

2.

B

and lens in

place with one hand while prying the edge of

the ring loose with a small screwdriver or plas-

tic knife. If you use a screwdriver, cover the

end with tape to prevent scratching.

b

A

b

C

D

A