Caple C739G - Manual (Page 8)

8
BURNERS
GAS
NORMAL
PRESSURE
NOMINAL
RATE
INJECTOR
DIAMETER
TYPE BY
PASS
DIAMETER
NOMINAL
HEAT INPUT
(W)
N° DESCRIPTION mbar g/h L/h 1/100 mm 1/100 mm Max. Min.
1 RAPID
G0 28 - 0 225 - 85 42 000 950
G1 7 214 - 85 42 000 950
G20 20 - 290 115Y Reg. 000 950
G25 25 - 2 121 (F2) Reg. 000 950
2 SEMI-RAPID
G0 28 - 0 126 - 65 1 1750 600
G1 7 125 - 65 1 1750 600
G20 20 - 165 97Z Reg. 1750 600
G25 25 - 194 94 Y Reg. 1750 600
AUXILIARY
G0 28 - 0 71 - 50 27 1000 450
G1 7 71 - 50 27 1000 450
G20 20 - 99 72X Reg. 1000 450
G25 25 - 111 72 (F1) Reg. 1000 450
4 TRIPLE RING
G0 28 - 0 278 - 98 60 800 2100
G1 7 272 - 98 60 800 2100
G20 20 - 67 15K Reg. 800 2100
G25 25 - 421 14 (F) Reg. 800 2100
This product complies with EU Directive 2002/96/EC.
The crossed-out dustbin symbol reported on the appliance indicates that the appliance must
be disposed of separately from other domestic refuse at the end of its useful life. It must
therefore be delivered to a waste recycling centre specifi cally for electric and electronic
equipment or returned to the retailer at the moment of purchase of a new equivalent
appliance.
The user is responsible for delivering the appliance to the appropriate collection centre at the end of its
useful life, Failure to do so may result in a fine, as provided for by laws governing waste disposal.
Differential collection of waste products for eventual recycling, treatment and environmentally friendly
disposal helps reduce possible negative effects on the environment and health, and also enables the
materials making up the product to be recycled.
For more detailed information on the available refuse collection systems, refer to the local Municipal Solid
Waste disposal centre or the shop where the product was purchased.
Producers and importers are responsible for fulfi lling their obligations as regards recycling, treatment and
environmentally friendly disposal by directly or indirectly participating in the collection system.
TECHNICAL CHARACTERISTIC TABLES