beautypg.com

Important safety requirements – Caple C742G User Manual

Page 6

background image

6

Gas category

I

3+ 28~30/37

BE, FR, IT, LU, IE, GB, GR, PT, ES, CY, CZ, LT, SK, CH, SI

I

3B/P(30)

LU, NL, DK, FI, SE, CY, CZ, EE, LT, MT, SK, SI, BG, IS, NO, TR, HR, RO, IT, HU

I

3B/P(37)

PL

I

3B/P(50)

AT, DE, CH, SK

I

2Lw

PL

I

2Ls

PL

I

2E+

BE, FR

I

2H(20

FR, IT, BE, NL, DK, IE, GB, GR, ES, PT, AT, FI, SE CZ, EE, HU, LV, LT, SK, SI, IS, NO,

I

2E(20)

DE, LU, PL

Note: when injectors are changed, the new one should be marked by the gas technician.

Appliance Class: 3

This appliance complies with the following E.E.C. Directives: 2006/95, 93/68, 2004/108 and 90/396.

Electric:

BS plug (230 V 50 Hz supply, 3 core flexible cable with non rewireable plug fitted with a 3 amp cartridge fuse.):

GB, TR, CY, MT

VDE plug

FR, BE, NL, GR, ES, PT, AT, FI, SE, CZ, EE, HU, LV, LT, SK, SI, IS, NO, TR, BG, HR, RO, DE, LU,PL, CY,

MT

Italy plug: IT

Swiss plug: CH

Denmark plug: DK

(Pls see figure 8)

Important safety requirements

Provision for ventilation

The hob should not be installed in a bed sitting room with a volume of less than 20m . If it is installed in a room of volume less than 5m

an air vent of effective area of 110cm is required. If it is installed in a room of volume between 5m and 10m

an air vent of effective

area of 50cm is required, while if the volume exceeds 11m no air vent is required. However, if the room has a door which opens

directly to the outside no air vent is required even if the volume is between 5m

and 11m

3

. If there are other fuel burning appliances in

the same room, which should be consulted to determine the requisite air vent requirements.

Location

The hob may be located in a kitchen, a kitchen/diner or bed sitting room, but not in a bathroom, shower room or garage.

Before making the cut out in the worktop ensures that there is a minimum distance of 55 mm between the rear edge of the hob and the

wall.

A minimum distance of 100 mm must be left between the side edges of the hob and any adjacent cabinets or walls.

The minimum distance combustible material can be fitted above the hob in line with the edges of the hob is 400 mm.

If it is fitted below 400 mm a space of 50 mm must be allowed from the edges of the hob.

The minimum distance combustible material can be fitted directly above the hob is 700 mm. (See Figure 4*)

Warning: The use of a gas cooking appliance results in the production of heat and moisture in the room in which it is installed. Ensure that

This manual is related to the following products: