Caple C2470SS - Manual (Page 46)

TIMER TOUCH CONTROL
Setting the clock
Figure 1
“Auto” and “0:00” will start flashing when the unit is switched on for the first time. To set the clock,
press the central button for about 3 seconds. When
appears, press “+” or “-“ to set the correct
time.
Wait until a beep tells you that the clock has been set (figure 1).
To set the time at a later stage, press “+” and “-” together for 3 seconds and then adjust the clock as
described above.
Minute counter
Figure 2
As this minute counter does not control the oven, when it finishes counting the oven will continue to
work.
To set, press the central button for 3 seconds until
appears (figure 2). Press “+” and “-” to
set the required time.
To set the minute counter at a later stage, press the central button for 3 seconds and adjust as
described above.
The minute counter beeps when it finishes counting. To disable it, press any button.
Cooking time
Figure 3
This is a semi-automatic cooking function. It can be used to set cooking times.
Press the central button for 3 seconds. Then press it again until “dur” appears (figure 3). Press “+”
and “-” to set the required cooking time.