Caple C240SS - Manual (Page 12)

12
The temperature set is shown on the electronic program-
mer display and can be varied, with 5°C intervals, by
means of the programmer keys.
During the cooking the oven temperature is measured by
a sensor inside the cavity and is shown on the programmer
display.
1.
SELECTING THE COOKING FUNCTION
Turn the selector knob to the cooking function
required
The pre-set temperature appears on the programmer
display. °
C flashes on the display for 3 seconds. The
heating elements start cooking immediately.
2.
SETTING THE COOKING TEMPERATURE
The temperature can be changed when °C is flashing
on the display
2a. If ° C is not flashing press key 4 of the programmer.
2b. Press key 6 to increase the temperature or key 5 to
reduce it.
The maximum temperature which can be set is 250°C
while the minimum temperature is 50°C.
Note: When °C becomes steady the value shown on the
display indicates the oven cavity temperature.
Caution: If a temperature below the minimum value (50°C)
is set the system switches off automatically and
OFF
appears.
In this case repeat the procedure from point 2.
3.
SWITCHING OFF
Turn the selector knob to position
0 (oven OFF). The
programmer display shows the time.
°
C
P P
I
I
I I
I
I
I
I
I I I
I
I
4 5 6
SETTING THE COOKING (ONLY FOR THE COOKING FUNCTIONS)
Models where the programmer sets the temperature
0
F
A U T O
P
0
F
° C
P P
Function
selector knob
Programmer
➀
➁
➂
Fig. 2.2
2a 2b