Caple CRG902SS - Manual (Page 31)

Burners
They can be removed and washed only with soapy water.
Detergents can be used but must not be abrasive or corrosive.
Do not use abrasive sponges or pads.
Do not put in dishwasher.
After cleaning or washing, check that burner-caps and burner-heads are dry before placing
them in the respective housings.
Special attention has to be paid in order not to exchange the housing of the small
burners shown in fig. 7.1.
It is absolutely necessary to check the perfect housing of the burner-ring as an incorrect
housing may cause serious problems.
Check also that the electrodes for ignition are always clean in order to ensure a regular
spark.
N.B. To avoid damage to the electric ignition, do not use it when the burners are not
in place.
Fig. 7.1
Burner-cap ring
partially drilled
Burner-cap rings
fully drilled
31