beautypg.com

Specifications – Dynex DX-E102 User Manual

Page 9

background image

Desktop 10/100Mb Network Card

9

3 Type ping xxx.xxx.xxx.xxx (where xxx.xxx.xxx.xxx is the IP address you want to

ping). In this case, computer B with the IP address=192.168.0.1 is being pinged from
computer A.

4 Press Enter to begin pinging. If the connection is good, you receive four “Reply from”

messages.

5 Type exit at the prompt to return to Windows.

Specifications

Interface

32-bit PCI interface

Standards

IEEE 802.3 10Base-T, IEEE802.3u 100Base-TX

Transmission

10 Mbps or 20 Mbps, 100 Mbps or 200 Mbps

Hardware

IBM PC compatibles (must have PCI slot)

Supported connectors

RJ45

IRQ line

Assigned by system

Topology

Star

I/O address

Assigned by system

Safety and emissions

FCC

System support

Microsoft Windows 7, Vista, XP, 2000, and
Mac OS X v10.4.0 or higher

Operating temperature

32°F~104°F (0°C~40°C)

Humidity

10%~90%, non-condensing

DX-E102-ENG.fm Page 9 Tuesday, October 20, 2009 7:43 PM