Caple WMi1010 - Manual (Page 5)

Page 5
WMi1010 user manual.doc
CONTROL PANEL
To become familiar with your
machine functions, compare the
symbols on the control panel with
those described below.
ON/OFF
By pressing this button the machine turns on and executes the set wash cycle. It is
used to turn the washing machine on and off.
POWER INDICATOR
When lit, it indicates that the washing machine is electrically energized.
HALF LOAD
Reduces the amount of water used in the wash and rinse cycles, thus greatly
reducing water and electricity consumption as well as the amount of washing
detergent. It is used to wash a reduced load of dry clothes (MAX 2.5 kg).
ENERGY SAVINGS
By pressing this button the washing temperature will remain at 60°C thus greatly
reducing the electricity consumption. It is used for slightly dirty clothes on white
normal wash cycles with or without prewashing and in particular wash detergents
recommended for washing at 60°C or liquid detergents.
COLD WASH
When this button is pressed, the machine will not use the wash water heater. It is
used for slightly dirty clothes or for temperature-sensitive fabrics.
SPIN BY-PASS BUTTON
By pushing this button the washing machine will not spin during or at the end of the
wash cycle. This function is used for no-spin fabrics.
SPIN SELECTION BUTTON
By pushing this button (according to the model type) the machine
will perform the final spin at the maximum spin speed setting (i.e.
850-1000-1200-1300-1400). It is used for resistant fabrics so
that there will be less water in the wash at the end of the spin cycle.
SPINNING INDICATOR LIGHT
When lit it indicates that the final spin at the maximum rotation speed has
been selected.
SUPPLEMENTARY RINSING
By pushing it, the number of rinsings will be increased by a unit, both in the
delicate and in the normal programs.
850
1000