Caple CAFF205BK - Manual (Page 6)

Proper use of refrigerator Proper use of refrigerator
9
10
Turning off the refrigerator: when the refrigerator is the ON , push and hold the
button“ REF.TEMP.” for 3 seconds, the refrigerator is turned off with a beep.
Adjust the temperature to cancel the function of turn-off.
When closing the refrigerator, the icon of the refrigerator turns on. The double
8 shows “- -”, and the relevant icon of the refrigerator turns off.
Freezer temperature setting
Function:
Set the temperature of the freezer in the following range: -16℃- -24℃. 1℃ changes
Operation:
Temperature adjusting: push the button “ FRZ.TEMP.” once, and the icon of the
freezer flashes. Push the button again to adjust temperature. (The cycle of the
adjustment order is the present temperature- -16- … …- -24- -16) The setting comes
into effect after 5 seconds of temperature adjusting.
Push the button “ VACATION” , "VACATION" icon turns on, to enter the vacation
mode. Push this button again to exit this mode.
The system can close the refrigerator automatically. The refrigerator temperature is
set at -15℃. The closed compartments will not cool. The cooling compartments will
operate at the set temperature.
Energy-saving mode
In the mode of energy saving, the refrigerator and freezer operate at the set
temperature Trs= 7℃ and Trs= -15℃ respectively.
QUICK REF.: push this button, and the indicator of quick cooling flashes, which
indicates the quick-cooling mode. The relevant icons and words flash. Push the
unlock button to confirm it.
QUICK FRZ.: push this button, and the indicator of quick-freeze flashes, which
indicates the quick-freeze mode. The relevant icons and words flash. Push the
unlock button to confirm it.
Push the button “QUICK FRZ”again when the quick-freeze icon flashes, the quick-
freeze time shown by the freezer changes in the cycle of 6h-8h-12h-24h-48h-exit the
quick-freeze mode. Push the button of “ LOCK/UNLOCK” to confirm it and the
flashing stops.
with every press.
Vacation mode
Quick FRZ. function is a design aim to maintain the nutritional value of frozen
food. It can be thoroughly frozen in the shortest time. If you need to freeze a lot
of food in one time, we recommend setting fast freezing feature 12h in advance,
so the freezer could turn to a low temperature, and then put the food in . At that
time, the freezing capability speeds up in freezer, freezing foods quickly and
effectively lock the foods’ nutrition.
Unlock
Under the lock state, push and hold the button “ LOCK/UNLOCK” for 3
seconds, the display panel unlocks. If time is less than 3 seconds the unlock
icon flashes, which means unlock failed.
Under the unlock state, push and hold the button “ LOCK/UNLOCK” for 3
seconds, it will be locked manually, and the lock icon turns on.
Every time the operation button is pushed, it sets off a beep. Do not push any
button after continuous 60 seconds, it will be locked automatically, and the lock
icon turns on.
All operations (except the ice-water selector key and the filter reset key) under
the unlock state are available. Under the lock state, the lock icons flash with
beep alarm when pushing other buttons.
Switch key for the ice maker
Choose the switch key of ice maker, push to start ice-making function until the
ice storage box is full, after removing theice cubes the ice storage will be filled
automaticlly, and push this button again to cancel the ice-making function.
Key of ice water selecting: (available in the key lock state) push
this button and get water, ice, crushed ice according to the following cycle.
water ---- crushed ice ---- ice
Reset of the filter
Push and hold the filter reset button for 3 seconds to reset the filter.
Memory of the first energized state after power cut
The controller has the function of power cut memory.
Memory contents:
Mode (quick-freeze time and quick cool time will be retimed after power-up)
The setting temperature of refrigerator and freezer
Accumulation time of defrost (time accuracy: 1h) (if the temperature of the
defrost sensor > 2℃, the defrost time accuracy is 0.)
The first power-up state: the default state (setting temperature: refrigerator 5℃/
Freezer-18℃) (the factory state of the controller)