Maintenance – Caple FSCHSS User Manual
Page 5

4
Maintenance
Changing and cleaning the filter
● Removing the filters as the instruction in Pic. 7;
● You can clean the filter as below measure:
1. Soak them for about 3 minute in hot water (40-50 degrees) with a
grease-loosening detergent then brush it gently with a soft brush. Please
do not apply too much pressure, avoid damaging it.
2. It can be put into a dishwasher with detergent, set the temperature at
around 60 degrees.
● Please do not use abrasive detergent for it will damage the hood;
● Make sure that the hood is shut off before cleaning;
C
hanging the light See Pic 8
z
Before changing the lights, ensure that the appliance is not live (i.e.,
ensure that you have switched it off at the wall switch).
z
Press the handle of the Aluminium filter towards the rear part of the unit
until it is released from the front housing, and remove it by pressing
downwards.
z
Change the incandescent bulb using only Max. 40W E14 olive-shaped
bulb
z
Replace the Al filter to the original position