Caple FSCHSS - Manual (Page 3)

2
Installation
Method A
1) The cooker hoods should be placed at a distance of 65-75cm from the
cooking surface for best effect. See Pic 1
2) To install onto the wall, drill 4 holes of Ø 8mm on a suitable place according
with the centre distance of the hole in the back of the cooker hood .See Pic 2
3) Insert the nut into the holes.
4) Insert the screws into the nuts and tighten.
5) Place the cooker hood onto the fixed screws.
6) Then use the attached accessories enclosed to turn the screws into the two
holes inside the hood, and then fix the screws to tighten the hood onto the
wall.
7) Put the one way valve onto the cooker hood.
Method B See Pic3:
1) Drill 4 holes of Ø 6mm at the bottom of the hanging cupboard
2) Put the one way valve on the air outlet of cooker hood, then install the cooker
hood on the bottom of the cupboard, tighten the cooker hood with enclosed
4 screws.
3) Install the adjusted board on the bottom of the hood in order to keep out the
gap between hood back and cupboard.