Campomatic WM909XE Turbologic XXL - Manual (Page 11)

FUNCTION BUTTONS
Rinse hold
This function is recommended to be used when the clothes
cannot be taken immediately after the end of the program.
This will prevent occurrence of wrinkles.When this button is
pressed, the last rinsing water is not drained. For the
program to continue from the start pause, repress the start
pause
If you do not want your sensitive clothes to be spinned or you
want them to be spinned sensitively, turn the program knob
to O (off) position. Bring the program knob on one of
the draining or spinning programs you desire and press
the start/pause button. If the program you have
selected is a drain program, your machine will
draining the water inside.If you have selected a
spinning program, your machine will perform a spinning
operation and then end the program.
Easy ironing
By using this function, you can ensure your clothes to come
out less wrinkled after the washing.
Eco-rapid wash
This function serves for saving energy via decreasing the
temperature value and increasing the wash time of the
selected wash programme by a certain level.
Your machine has also an automatic load detection system. If
you load your machine with half load or less, your machine
can detect this lower load and change the programme flow.
The “rapid wash” option lamp will come on to show you that
lower load is detected. If you don’t want your programme flow
to be changed, then you can press “rapid wash” option button
again and cancel detection. This time the machine will work
with normal program flow and it will not be possible to activate
“rapid wash” for this cycle again.
10