Campomatic WM80LS - Manual (Page 16)

Adjusting the levelling feet
Service Instructions
Check if the leveling leg is level
If the floor is uneven, adjust the leveling leg of the washing machine
(do not insert pieces of wood or any other objects under the leg):
When you tighten the leg bolt with the wrench for fixation and
adjustment, avoid movement of the leg.
The washing machine is level when four legs do not shake relative to the ground.
The steps you can follow:
1.
Press the two diagonal corners at the top of
the washing machine with your hands to check
if the washing machine still shakes.The two
diagonals have to be checked.
2. If the washing machine still shakes, the leg
must be readjusted.
1
. Turn left to loosen the leg bolt with
the wrench.
3
. Tighten the leg bolt with the wrench.
4
. Adjust the four leveling legs as needed.
2
. Adjust the leveling leg until it is at the desired
height, turn left for higher, and turn right for
lower.
Wrench
Wrench
Leg bolt
Leg bolt
Leveling leg
Leveling leg
Adjust the leg higher