Maintenance – Campomatic WM747 Inox Jumbo User Manual

Page 13

SM2755

MAINTENANCE

CLEANING THE FILTER

WARNING!! Before starting the operations described below, make sure

that the washing machine is empty. Do not remove the fi lter
while the washing machine is running, or when full of water.

Place a cloth or tray under the fi lter to collect any water that may still be inside Open
the fi lter door, unscrew the fi lter and remove it by turning it in an anticlockwise direc-
tion (fi g. 31-32).

The fi lter must be cleaned periodically.

Rinse the fi lter under running water to eliminate any residues. Replace the fi lter by
screwing it in clockwise, making sure it closes and seals properly.

CLEANING THE WASHING MACHINE

The washing machine has been specifi cally designed to reduce maintenance to a
minimum. Nevertheless, it is important that it is cleaned regularly.

Before cleaning, make sure that the appliance has been disconnected from the power
supply and that the water supply valve has been closed.

The external structure and the parts of the washing machine in plastic must be
cleaned with a soft damp cloth only.

WARNING!! Never use chemicals, abrasive products, alcohol, soap, petrol

or other solvents to clean the appliance as these may cause
damage. (fi g. 28)

After washing, leave the door open for a short time to allow rubber parts to dry.

Periodically wash out the detergent compartments. To do this, remove the detergent
compartment and rinse it under running water (fi g. 29). Then replace it.

REMOVING THE DETERGENT DRAWER

▼

open the detergent drawer;

▼

press on the word “PUSH” with the right hand and pull out the drawer with the

left hand (fi g. 30).