Campomatic WM747 Inox Jumbo - Manual (Page 11)

14
SM2755
When this button is pushed, the washing machine will stop automatically at the end
of the last rinse cycle and before draining the water.
In this case, the washing is held in the water-fi lled drum to prevent creasing.
This function only works for the delicate wash cycle.
To start the machine, pull programmer knob or if the machine has push-button,
press the start push-button .
The indicator light will be illuminated.
GB
WASHING INSTRUCTIONS
ON/OFF KNOB OR BUTTON
PROGRAMME TABLE
24
23
NO-DRAIN BUTTON
EXTRA RINSE BUTTON
NO-SPIN BUTTON
TEMPERATURE LIMIT BUTTON
26
27
25
The washing machine has been designed to reduce water consumption to a minimum.
Three rinse cycles are normally suffi cient.
For very soft water zones or for those who are allergic to detergent residues, press
this button and the machine will carry out an extra rinse.
Pushing this button the washing machine carries out a normal wash cycle but does
not spin.
Pushing this button will limit the temperature to 60° when the temperature dial is set
at a higher temperature.