Campomatic FRZ360N - Manual (Page 7)

GB 7
913
POSITIONING AND INSTALLING THE APPLIANCE
2b
2a
2c
2b2
2d
1 Once the appliance has been unpacked, check that the mains voltage is the same as that indicated on the rating
plate.
2 If the door opening direction is as required, go to Point
3 Otherwise, reverse the position of the hinges.
To do this, carefully place the appliance on its back. Use spacers to prevent crushing the condenser pipes and
damaging the compressor unit.
2a Remove the plinth by pulling it.
2b Remove the lower hinge and unscrew pin (A).
2c Remove the door by pulling downwards.
2d Unscrew the upper pin and screw it in on the opposite side.
A
2b3