Campomatic CT1190 - Manual (Page 14)

13
2) Press
▲ or ▼ key to select the designated message.
3) Press key to select “ADD TO PB”.
4) Press key to confirm to edit the incoming message.
5) The user can delete the character by pressing R/CLR key.
6) If there is no change, press key to confirm and the record will be copied from caller list to phone
book.
View & dial out phone numbers from phonebook
There are 50 phonebook memories; each memory can store 12 characters and 20 digits.
1) In on-hook state, press key.
2) Then press ▲ or ▼ key to review the number.
3) When the desired number is shown on LCD and press the or key to dial out the number
automatically.
Memory full
There are 50 phone book memories.
The LCD will show memory full when all memories have been occupied in the phone book, the user should
delete some messages which are stored in the phonebook.
Intercom
The intercom feature is activated by pressing the INT key.
1. In idle mode, press INT key once.
2. The user will be prompted to select the number of the internal handset with which you wish to connect.
3. The destination handset will ring.
Once the call is connected, the display will be shown on both handsets. To end intercom mode, either
handset can hang up the call by press key.
Call transfer
During a call, it’s to transfer the call to another handset.
1. During a phone call, press INT key once, you will be prompted to select the number of the internal
handset with which they wish to connect.
2. The destination handset will ring. With the melody defined for an internal call.
3. Press the or key of the other handset to accept the call.
The two internal handsets will be connected. To complete the transfer of the call, the initiating handset
should be placed on the cradle and the external call will now be connected to the second handset.
Party conference call
1. When a call comes, Press (HS1) or key
2. Then press (HS1) INT key once, you will be prompted to select the number of the internal handset with
which you wish to connect.
3. The destination handset will ring.
4. Press (HS2) the or key to accept call.
5. Press (HS1) then the key then you can talk all together.