BUG-O Systems Programmable Shape Machine - Manual (Page 13)

Cutting Pipes with DeskCNC and Shape using sample.dxf
Installation:
1. Run DeskCNC.exe
2. Copy posts.cfg to C:\Program Files\DeskCNC, overwriting the old file
3. Run the setup file for the Shape program
Prepare your DXF
• Remove lines that are not part of the shape (I left the top and bottom lines to show how to
remove them in DeskCNC)
• Make sure dimensions are 1:1
Configure DeskCNC.
1. Machine Setup
a. Click Setup‐>Machine Setup
b. Click DeskCNC Setup
c. Set the Units to match your units
d. Click Save
2. Post Processor Setup. This must be done every time the program is started
a. Click Setup‐>Post Processor Setup