BUG-O Systems CAS-2050 - Manual (Page 6)

6
SETUP
CaS-1500 Height Slide assembly
The Height Slide Assembly replaces the Welding Clamp originally supplied on the Linear Weaver. It
mounts to the 7/8" (22.2 mm) diameter rod. (Remove CON-1020 Swivel Clamp and BUG-2708 Clamp
and set aside for use when Automatic Height Control is not used.)
Slide clamp on bottom of CAS-1500 Height Slide Assembly onto UNI-1036 Rackrider with Post and
lock in position.
CaS-2055 MdS aHC Control Box
This mounts directly on top of the MDS Drive. Align the socket on the top of the MDS Drive with the
plug on the bottom of the AHC Control Box and seat it securely in place with the four (4) screws, one
(1) in each corner.
CaS-2051-10 MdS aHC 10' (3.0 m) Remote Control
To install, align the plug in the bottom of the Male portion of this Remote Control with the socket on top
of CAS-2055. Seat this plug securely in place with the four (4) screws, one (1) in each corner.