BUG-O Systems AGS-4000 - Manual (Page 29)

29
A minimum of three (3) magnet plate or
screw feet assemblies are required for each
ring rail section.
Vacuum Supports may be used instead of mag-
nets to mount the Ring Rail on non-magnetic
work pieces. Each Vacuum Support System
requires a Vacuum Pump Kit for operation.
ARV-1240-20 20" Dia. Vacuum Support System
ARV-1240-27 27" Dia. Vacuum Support System
ARV-1240-34 34" Dia. Vacuum Support System
ARV-1240-41 41" Dia. Vacuum Support System
ARV-1240-48 48" Dia. Vacuum Support System
ARV-2020 120VAC Vacuum Pump Kit
ARV-2030 220VAC Vacuum Pump Kit
MAGNET ATTACHMENTS VACUUM SUPPORTS
BUG-5910 TUBE CARRIAGE / EXPLODED VIEW / PARTS LIST
The Tube Carriage features a split
carriage body for quick and easy
placement on the rail. It has a carrying
capacity of 100 lb (45 kg). The carriage
also offers six (6) wheel positions for
circumferential applications over a
wide range of diameters. Use with
BUG-O Aluminum Rigid, Semi-Flex or
Bent Rigid Rails.
ITEM PART NO DESCRIPTION QTY
1 BUG-5907 Skirt 2
2 BUG-5512 Knob 1
3 BUG-5918 Fixed Wheel Assembly 2
4 BUG-5920 Adj. Wheel Assembly 2
1
2
4
3
Support Bar
w/ Screw Feet
ARM-2380
4.5" (114.3 mm) of Adj.
Also available as a
kit of three (3)
ARM-2390
Support Bar
w/ R.E On/Off Magnets
ARM-2580
3.5" (88.9 mm) of Adj.
Also available as a
kit of three (3)
ARM-2590
Support Bar
w/ Magnets
ARM-2480
3.5" (88.9 mm) of Adj.
Also available as a
kit of three (3)
ARM-2490