BUG-O Systems AGS-4000 - Manual (Page 25)

25
AFR-3000 SEMI-FLEX RAIL / CROSS SECTION / EXPLODED VIEW /
PARTS LIST
A 2.75" (70 mm)
B 4.0" (102 mm)
C 0.33" (8.5 mm)
D 0.500" (12.7 mm)
A
B
C
D
AFR CROSS SECTION VIEW
SEMI-FLEX RAIL can be bent inside or outside to a minimum radius of 15' (5 m) without
permanent deformation. A splice plate is mounted at one end of each flex-rail section for
connecting multiple sections of rail. A rack adjusting tool is supplied with every two (2)
rails, for moving the rack on the rail. Available in 8' ( 2.37 m) lengths. Use at least four (4)
attachments - vacuum cups or magnets - on each section of Semi-Flex Rail.
PARTS LIST
ITEM PART NO. DESCRIPTION QTY
1 AFR-1015 Spacer Washer 16
2 AFR-2001 Rack Adjuster Tool 1
3 AFR-3002 Splice Plate 1
4 AFR-3006 Rack 1
5 AFR-3009 Extrusion, Punched 1
6 FAS-0955 Screw, Flt Hd Soc 1/4-20 x 1/2 4
7 FAS-1446-HW S.T. Slt. Hx. #10-32 x 5/8 16
8 WAS-0230 #10 Washer 16
Minimum Radius
15' (5 m)
1
2
4
7
3
5
6
8
8'
(2.37 m)
8'
(2.37 m)