BUG-O Systems Elbow Cutters 3rd Axis - Manual (Page 3)

3
PROGRAMMING
For programming, the following keys on the keypad are used:
Push A: To select type of cut and enter dimensions
B: To enter the time dealy for plasma cutting.
C: To display the Cut No. in memory (Nos. 0-10)
D: To display the type and dimensions of cut.
E: To enter end of cut slowdown.
To Program a cut, select one of five types as follows:
Type 1: Saddle Cut on centerline.
Type 2: Saddle Cut offset (hillside).
Type 3: Lateral Cut, offset or on centerline (for center line, put offset=0)
Type4: Mitre Cut
Type 5: Holes (see next page).