BSS Audio MSR-602/604II Owner's Manual - Manual (Page 32)

3 0
MSR-600 II Series
8.0 Technical Specifications
Technical Specifications
Please order as ‘MSR-604 II balanced output transformer kit Z-
MSRTX0II-01’. This is per channel with four required for one MSR-604
II unit. Full fitting instructions are provided with this kit.
Channels Four: Independant or internally interconnected
Inputs XLR-3F Electronically balanced (Transformers optional)
Microphone Line
Impedance 2k
Ω
10k
Ω
Max. input level +13dBu +33dBu
CMRR >90dB @ 1kHz >75dB 50Hz to 10kHz
Phantom Power 48VDC via panel switch and LED indicator
Outputs Main (FOH) & Mon, XLR-3M, Electronically balanced
(Transformers optional)
Max level (internally preset)
+3dBm +13dBm +23dBu
Impedance <23
Ω
<71
Ω
<100
Ω
Max load 200
Ω
600
Ω
600
Ω
Feeds: Two, XLR-3M, Transformer balanced
Max level
+3dBu
Impedance <50
Ω
Max load 600
Ω
Isolation 2.5kV ACrms for 1 minute
Gain -40dB to +50dB in 10dB steps
Gain switch
-10, 0, 10, 20, 30dB via panel
Mic/Line pad 0/-20dB via panel
Remote pad 0/-10dB via F.O.H. phantom
Output scaling +20/+10/0dB via internal jumper
blocks (Main & Mon only)
Frequency Response <+/-0.5dB 20Hz to 20kHz
Noise (E.I.N.) (20Hz to 20kHz)
-10dB gain <-114dBu
0dB gain <-121dBu
10dB gain <-124dBu
20dB gain <-125dBu
30dB gain <-126dBu
Distortion (T.H.D.) <0.01% 20Hz to 20kHz @ 10dB below clip
Level Metering & Monitoring
Channel Clip LED @ 1dB below clip
Headroom meter on MSR-602 II PSU
Six point LED meter: 0,-1,-3,-6,-12,-26dB
Via Listen switch (momentary)
Headphone monitor on MSR-602 II PSU
Via Listen switch (momentary)
MSR-604 II