BSS Audio FDS-318 Owner's Manual - Manual (Page 17)

17
10.0 Controls and connections
10.1 Crossover
frequency
adjustment control
Controls and connections
10.2 Output level
control
10.3 Polarity reverse
switch
10.4 Mute switch
Left and right hand channels are adjustable separately. The frequency scaling
LEDs, marked as x10 and /10, indicates whether the printed frequency scale
needs to be multiplied or divided by 10 for the correct value. The control of
this is determined by the SELECT MODE switch on the rear panel.
Individual output control adjustable from -6dB of gain to OFF. To ensure
adequate resolution, the first 12dB of control range covers approximately 60%
of the available control rotation.
Individual polarity reverse selector switch. Push to invert the polarity of the
signal in that band.
Push to MUTE the signal in the selected band. The number marked on the
switch cap corresponds to the numbered output connectors on the rear panel.