BSS Audio sw3088 Install Guide - Manual (Page 8)

Soundweb 3088 Installation Guide
8
Technical Specifications
General
DSP capability 200MIPS (Million Instructions Per Second)
Frequency response 15Hz to 20kHz (+-0.5d8)
Total Harmonic Distortion (THD) <0.01 % (20Hz to 20kHz, +10dBu output)
Dynamic range 105dB typical (22Hz to 22kHz unweighted)
108dB typical (A-weighted)
Maximum output level +20dBu
Inter-channel crosstalk<-75dB
Mains supply
85-270V AC, 50/60Hz
Power consumption <35VA
Control Ports
Control input voltage 0 to 4.5V
Control input impedance (2 wire mode) 4.7kOhms to +5V
Control input impedance (3 wire mode) >1 MOhm
Logic output voltage 0 or +5V unloaded
Logic output impedance 440 Ohm
Opto output current 14mA max
Opto output withstanding voltage 80V max
Opto output series impnedance 220 Ohms (isolated)
Card Options:
Universal microphone/line input card
Input impedance 3.5kOhms
Maximum input level +20dBu (with 0dB gain)
Gain range 0 to 70dB
CMRR >75d8 at 1 kHz
Equivalent (nput Noise (EIN) <-128dBu typical (with 150 Ohms source)
Phantom power 48V nominal
AES Digital Card
Interface standard AES/EBU
Digital resolution 24bit
Supported input sampling rates 32-96kHz
Supported output sampling rates 44.1, 48, 88.2, 96kHz (independent for each output)
Output clock source Internal, Inputs 1 & 2, External Word Clock or
System Clock (48kHz)
Input clock source Independent or System Clock
Part No. ZM10101-01 V1.0