BSS Audio BLU-BOB1 Install Guide - Manual (Page 6)

4
T e c h n i c a l S p e c i f i c a T i o n S :
front panel leD indicators: Signal present per output, and Power
analog outputs: 8 electronically balanced on Phoenix/Combicon
removable screw connectors
Maximum Output Level: +19dBu
Frequency Response: 20Hz-20KHz (+0.5dB/-1dB)
THD: <0.01% 20Hz to 20KHz, +10dBu output
Dynamic Range: 110dB typical, 20Hz-20KHz unweighted
Crosstalk: <-105dB 20Hz-20KHz
D/A Latency: 28/Fs (0.58ms@48k, 0.29ms@96k)
Output Impedence: 40 Ω balanced / 20 Ω unbalanced
Digital audio Bus:
Connectors:
2 x RJ45 Ethernet connectors
Maximum Cable Length: 100m/300ft on Category 5e cable between devices
Maximum Number of Nodes: 60
Latency Per Node: 4/Fs (0.08ms@48k, 0.04ms@96k)
power and Dimensions:
Power Supply:
12VDC external adapter (included)
AC Power Input to Adapter: 19W
BTU Rating: 65 BTU/hr
Operating Temperature Range: 5 (41) to 35 (95) degrees C (degrees F)
Dimensions BLU-BOB1 (H(U) x W x D): 1.65” (1U) x 8.63” x 7.75” (42mm x 219mm x 197mm)
Dimensions BLU-BOB2 (H(U) x W x D): 1.75” (1U) x 19” x 7.75” (45mm x 483mm x 197mm)
Weight BLU-BOB1: 2.96 lbs / 1.34 kg
Weight BLU-BOB2: 5.13 lbs / 2.33 kg