BSS Audio BLU-8v2BLK Install Guide - Manual (Page 2)

3 2
DECLARATION OF CONFORMITY
Manufacturer’s Name: BSS Audio
Manufacturer’s Address: 8760 S. Sandy Parkway
Sandy, Utah 84070, USA
declares that the product:
Product name: BLU 8 – V2
Note: Product name may be suffixed by the letters -EU and BLK or WHT.
Product option: PS48POE (power adapter)
BSS999-PSU (power adapter)
conforms to the following Product Specifications:
Safety: IEC 60065 -01+Amd1
EMC: EN 55022:2006
EN 55024:1998
FCC Part 15
Supplementary Information:
The product herewith complies with the requirements of the:
Low Voltage Directive 2006/95/EC
EMC Directive 2004/108/EC.
RoHS Directive 2002/95/EC
WEEE Directive 2002/96/EC
With regard to Directive 2005/32/EC and EC Regulation 1275/2008 of 17 December 2008, this product
is designed, produced, and classified as Professional Audio Equipment and thus is exempt from this
Directive.
Roger Johnsen
Director, Engineering
Signal Processing
8760 S. Sandy Parkway
Sandy, Utah 84070, USA
Date: April 27, 2011
European Contact: Your local BSS Audio Sales and Service Office or
Harman Signal Processing
8760 South Sandy Parkway
Sandy, Utah
84070 USA
Ph: (801) 566-8800
Fax: (801) 568-7583
Regulatory Information
An example of this equipment has been tested and found to comply with the
International Standards for Electromagnetic Compatibility as referenced in the
Declaration of Conformity above (only when used with a metal wall-box).
All interconnecting Ethernet cables must be of a shielded type.
Introduction
We have written this guide with the aim of helping installers and sound engineers
alike to get the most out of the BLU-8v2. We recommend that you read this manual
before attempting to operate the unit. We welcome any comments or questions
regarding the BLU-8v2 or other BSS Audio products, and you may contact us at the
address or world wide web sites shown on the cover.