Bronkhorst CoriCalc - Manual (Page 2)

page 2 9.17.056
Scope of this manual
This instruction manual covers the operation of the software tool CoriCalc, provided by Bronkhorst Cori-Tech B.V. to
make calculations for (mini) CORI-FLOW® instruments. Main features are calculating the inlet pressure, outlet
pressure, the orifice or the flow through a CORI-FLOW® instrument.
This instruction manual has been written based on CoriCalc V1.04. However, it should be suited for former and later
versions as well. Where needed, there will be a short notice about different versions.
Note
1.
Some program features described in this manual are optional. Bronkhorst Cori-Tech has the right to enable or
disable certain parts of the program to adjust CoriCalc to the needs of the user.
Too many features can lead to trouble. Too few features can lead to inconvenience. Please contact your sales
representative or Bronkhorst Cori-Tech in Ruurlo, The Netherlands, to discuss this issue.
2. Although calculations by the program are found to be reliable and can be used for instrument sizing in the field,
checking by Bronkhorst sales support might sometimes lead to a different instrument advice.