Bronkhorst Bronkhorst - Manual (Page 9)

BRONKHORST ®
Finally select the location to store the license request file. Make sure to remember this location as the license request
file needs to be send to Bronkhorst. On Commit, the file will be created and the final page is shown that the license
file has been successfully created.
Now, send the created file with the extension .WibuCmRaC by e‐mail to
[email protected] .
3.2.2 Import a remote update file
In case the license request is accepted and processed, you will receive the remote update file (with extension
.WibuCmRaU) from Bronkhorst by e‐mail.
Start the CodeMeter Control Center by Start >> (All) Programs >> CodeMeter >> CodeMeter Control Center.
Select the correct Bronkhorst Software Dongle and start the CmFAS Assistant by pressing License Update.
At the second page, select Import license update as the desired action and press Next >.
Select the location of the remote update file with the extension .WibuCmRaU and press Commit to start the update
process.
Page 9 Bronkhorst Software Dongle 9.17.069