Broadata Communications 730E-T Series - Manual (Page 10)

BCI 730E User’s Manual
Fiber Optic CATV Transmitter
Broadata Technical Support, [email protected] 11
5.0 INSTALLATION
Invisible optical beam comes out from the end of the optical
connector, permanent damage would happen to eyes if see it
directly.
5.1 Fiber Connection
Power off, carefully remove the protective cap from the end of
the FC/APC / SC/APC connector, insert the clean optical
connector into the mating and tighten the connector securely.
5.2 Power
Connect the power. Switch on the laser power on the back of
the unit. It is displayed on the LCD the type of the transmitter
and “READ TIME: 30 SEC”. Later when the laser is ready,
information will be automatically displayed on the LCD screen.
This machine should be safely grounded.