Broadata Communications 730E-R-OD - Manual (Page 6)

BCI 730E User’s Manual
Outdoor Optical CATV Node
Broadata Technical Support, [email protected] 7
Return Path, RF
Bandwidth 5 - 35/42/65MHz
RF input power >80dB optional
Flatness ±0.75dB
Return Loss >16dB
Test Points -20dB
Gain Adjustment Plug in attenuator 0-10dB 2dB per
step and Plug in attenuator 0-10dB
2dB per step
General
Power 60VAC or 220VAC (50/60Hz)
Power Consumption < 40W
RF Connector F
Dimensions (W x D x H) 9.69” x 7.56” x 4.88”
Operating Temperature 20ºC to +50ºC
IMPORTANT
1. Please do not attempt to look into the optical connector with
power applied, eye damage may result.
2. It is prohibited to touch the laser without any anti-static tool.
3. The optical input power should be only from -8 to +2dBm. The
receiver may work when input power is lower than -8dBm,
but CNR will be largely deteriorated; when the input power is
higher than 2dBm, CTB and CSO will be deteriorated and may
even cause the damage of the optical receiving module.
4. Clean the end of the connector with a lint free tissue moistened
with alcohol before you insert the connector into the receptacle
of the SC/APC adapter.
5. This machine should be grounded before operation. The
grounded resistence should be <4
Ω. Ω. Ω. Ω. Ω.
6. Please carefully bend the fiber.