Broadata Communications 1600 Series - Manual (Page 11)

BCI 1600 User’s Manual
Multi-Channel Fiber Optic Serial Data Video Transport System
Broadata Technical Support, (800) 214-0222 12
2.4 Power Connection
Congratulations! You are now ready to power up the BCI 1600
and set up your network connection. In order to make sure that
you have a proper installation, please observe the following:
1. Your AC jack has power.
2. Your electrical system has proper grounding (this ensures
that your power supply does not suffer from voltage
variations).
3. Power Surge Protection. This is optional, but highly
recommended. A UPS system provides voltage regularity
as well as prevents spikes from occurring, thus protecting
your 1600 from sensitive voltage conditions.
To provide power to the 1600, simply connect the power cord,
already provided with the units, and connect it to the wall jack.
(You will find one power cord per unit). Once the power cord
has been connected to the wall jack, connect the other end to
the unit and turn the switch on (I).
If you have any problems or concerns, regarding the installation,
make sure that you have taken the proper steps to ensure a
proper power connection. Otherwise, feel free to contact us for
any questions you may have.
3.0 OPERATION
After the installation procedure is completed, the units are ready for
operation. To operate the BCI 1600 units, simply apply power as
indicated in the previous step. Note that the front panel link status
indicator, shown in Table 2, will be activated.