Broadata Communications 1200E Series - Manual (Page 6)

BCI 1200E User’s Manual
Fiber Optic Serial Digital Audio Transport System
Broadata Technical Support, [email protected] 7
2.0 SETUP
The BCI 1200E Series units are used in pairs. In a bi-directional
application, one 1200E transceiver unit is located at the near-end and
connected through two optical fibers to an identical 1200E transceiver
located at the far end of the link. Each unit provides a separate electrical
interface connector for each audio channel. Connections are one to
one between both units. In a unidirectional application, a 1200E
transmitter (1200E-T) is located at the near-end and connected through
one fiber to a 1200E receiver (1200E-R) located at the far-end. Figure 2-1
depicts a typical installation.
Figure 2-1
1200E Setup