Broadata Communications Mini-HDMI-WP Series - Manual (Page 8)

Mini-HDMI-WP User’s Manual
Wall Plate Miniature Multimode Fiber Optic HDMI Transmission System
Broadata Technical Support, [email protected] 9
2.3 DC Power Connection
The standard option to connect a power source is a +12VDC, which is
used when power source is farther away (see Figure 2-3). In order to
make sure that you have a proper installation, please observe the
following:
1. Your AC jack has power.
2. The 12VDC power supply is working.
3. Your electrical system has proper grounding (this ensures
that your power supply does not suffer from voltage
variations).
4. Power Surge Protection. This is optional, but highly
recommended. A UPS system provides voltage regularity
as well as prevents spikes from occurring, thus protecting
your Mini-HDMI-WP from sensitive voltage conditions.
The Mini-HDMI-WP derives power from an external 12VDC power supply.
This power supply is a wall mounted AC/DC adapter, 100-240 VAC,
50-60 Hz, at or 0.5A.
If you have any problems or concerns, regarding the installation, make
sure that you have taken the proper steps to ensure a proper power
connection. Otherwise, feel free to contact us for any questions you
may have.
2.4 In-Wall Power/Fiber Wiring Instruction
The in-wall power/fiber installation for the Mini-HDMI-WP wall plate must
confirm national and local electrical codes, e.g., UL junction boxes shall
be used and DC power source shall not exceed product rated range
(+12VDC @ 0.5A). Follow the following steps for power/fiber installation:
1. As shown in Figure 2-4, feed both fiber and power cables through
the opening of the wall box, and secure the cables with cable
clamps to provide strain relief.