Broadata Communications Mini-DVI Series - Manual (Page 9)

BCI Mini-DVI User’s Manual
Miniature Multimode Fiber Optic DVI Transmission System
Broadata Technical Support, (800) 214-0222 10
2.3 DC Power Connection
Congratulations! You are now ready to power up the Mini-DVI and set up
your network connection. In order to make sure that you have a proper
installation, please observe the following:
1. Your AC jack has power.
2. The 5VDC power supply is working.
3. Your electrical system has proper grounding (this ensures
that your power supply does not suffer from voltage
variations).
4. Power Surge Protection. This is optional, but highly
recommended. A UPS system provides voltage regularity
as well as prevents spikes from occurring, thus protecting
your Mini-DVI from sensitive voltage conditions.
The Mini-DVI derives power from an external 5VDC power supply. This
power supply is a wall mounted AC/DC adapter, 100-240 VAC, 50-60 Hz,
at 1.0A. This power supply comes standard for the Mini-DVI unless
otherwise specified.
To provide power to the Mini-DVI, simply connect the power cord, already
provided with the units, and connect it to the wall jack. (You will find one
power cord per unit). Once the power cord has been connected to the
wall jack, connect 5VDC to the unit and the unit should power up
immediately.
If you have any problems or concerns, regarding the installation, make
sure that you have taken the proper steps to ensure a proper power
connection. Otherwise, feel free to contact us for any questions you
may have.
3.0 OPERATION
After the installation procedure is completed, the units are ready for
operation. To operate the BCI Mini-DVI units, simply apply power as
indicated in the previous step.