Broadata Communications Mini-DVI Series - Manual (Page 10)

Mini-DVI User’s Manual
Miniature Multimode Fiber Optic DVI Transmission System
Broadata Technical Support, [email protected] 11
4.0 MAINTENANCE AND TROUBLESHOOTING
4.1 Maintenance
There is no operator maintenance other then keeping the units
clean.
4.2 Troubleshooting
If the BCI Mini-DVI units do not operate properly after installation,
check for: possible cable breaks, loose connections, and
incorrect cable connections. If a problem exists on the fiber
link, please check your fiber connectors for improperly cleaned
fiber cables and connectors. If problems persist that may be
fiber related, contact BCI at 1-800-214-0222 for further
assistance.
For electrical problems, perform the following troubleshooting
procedures:
1. If the POWER indicator is OFF, check for the following:
a. The line cord is plugged into the unit and your outlet
has power.
2. If the POWER indicator is ON, but the units are not
working, check for the following:
a. Make sure the appropriate (Multimode) fibers are being
used.
b. Fiber and fiber connectors are not broken.
c. For each unit, the transmit (TX) fiber is connected to
the other unit’s receiver (RX).