Broadata Communications LBO-USB - Manual (Page 9)

LBO-USB User’s Manual
Link Bridge
TM Fiber Optic USB Hub Extension Systems
Broadata Technical Support, (800) 214-0222 10
2.4 DC Power Connection
Congratulations! You are now ready to power up the BCI LBO-USB and
set up your network connection. In order to make sure that you have a
proper installation, please observe the following:
1. Your AC jack has power.
2. The 12VDC power supply is working.
3. Your electrical system has proper grounding (this ensures that
your power supply does not suffer from voltage variations).
4. Power Surge Protection. This is optional, but highly
recommended. A UPS system provides voltage regularity as
well as prevents spikes from occurring, thus protecting your
LBO-USB from sensitive voltage conditions.
The LBO-USB derives power from an external 12VDC power supply.
This power supply is a wall-mounted AC/DC adapter, 100-240 VAC,
50-60 Hz, @1.5 A. This power supply comes standard for the LBO-USB
Series unless otherwise specified.
To provide power to the LBO-USB, simply connect the power supply,
already provided with the units, and connect it to the wall jack. (You will
find one power supply per unit). Once the power supply has been
connected to the wall jack, connect the 12VDC to the unit and the unit
should power up immediately.
If you have any problems or concerns, regarding the installation, make
sure that you have taken the proper steps to ensure a proper power
connection. Otherwise, feel free to contact us for any questions you
may have.