Broadata Communications LBO-DVI Series - Manual (Page 8)

LBO-DVI User’s Manual
Directly Pluggable Link Bridge TM Fiber Optic DVI Transmission System
Broadata Technical Support, [email protected] 9
2.2.2 Optical Fiber Connection
Most cable manufacturers identify individual fibers in the fiber
cable. Select an appropriate terminated fiber. Each unit’s optical
ports in the system are specified for use with SC-connectorized
Multimode (50u or 62.5um/125 micron) fiber. Follow the ensuing
instructions on installing and connecting the fiber optic links:
1. Ensure the power is off before proceeding with the fiber
optic cable installation.
2. Prior to connecting the fiber optic cables, remove and save
the dust caps from the optical port of both the LBO-DVI
units. Clean the fiber optic connector and use a lint-free
cloth to thoroughly wipe the side and end of the ferrule.
3. Connect the fiber from one unit to the other connecting the
near end LBO-DVI-T unit’s optical port to the far end of the
LBO-DVI-R unit’s optical RX port as illustrated in Figure 2-3.
Figure 2-3
Fiber Optic Connection