Brinly STH-420 BH Lawn Sweeper - Manual (Page 9)

1009727-A 9.
21
21
A
B
13
13
43
2
2
ASSEMBLY
================================================================================================
Attach Height Adjustment
Handle (2) to Lower Pivot (43)
side plate using Bolt (13) and
Lock Nut (21) in Panel 04.
Tighten hardware securely.
Note: Large hole (A) in bottom
of the Height Adjustment
Handle (2) must fi t over the
Tube (B) extending past the
Lower Pivot (43) side plate.
Note: Wheel assembly not shown for clarity.
Figure 04
16
18
19
4
19
27
7
25 1
19
Figure 05
Using the hardware in Panel 05:
First, assemble the Bolt (27) through the Left Tow Bar
(4) as shown and tighten securely:
• Bolt (27)
• 2 Washers (19)
• Lock Washer (18)
• Nut (16)
Second, assemble the Lock Arm (1) to the bolt as
shown:
• 2 Washers (19)
• Lock Arm (1)
• Nylon Lock Nut (1)
Note: Do not over tighten the Nylon Lock Nut (25).
The Lock Arm (1) should be able to pivot freely after
assembly.
Last, assemble over the end of the Bolt (27):
• Vinyl Bolt Cap (7)
First
First
Second
Second
Last
Last