Brinly SAT-40 BH Spike Aerator - Manual (Page 11)

L-1643BH-F
10.
MAINTENANCE
After the rst 30 minutes of use check all fasteners for tightness.
Tines are manufactured with galvanized steel to resist wear of
abrasive soil. Striking objects can cause tines to curl or break.
Contact our Customer Service Department to purchase replace-
ment Tines (Part # B-5423).
Aerator is essentially maintenance free. However as with any
steel product, it can rust. Apply a light coat of oil on tines after
use to prevent rust. For rust appearing on painted surfaces, sand
lightly and coat with enamel.
Periodically remove debris that builds up between tines.
Apply lubricating oil at each tine and bearing before use.
SPECIFICATIONS
Maximum Towing Speed ..................................................... 5 mph.
Maximum Load .................................................................. 150 lbs.
Empty Weight ...................................................................... 42 lbs.
Maximum Towed Weight ................................................... 192 lbs.
GETTING QUALITY SERVICE
Quality Continues with Quality Service
We provide a process to handle your questions or problems.
Follow the steps below to get answers to any questions you may
have about your product:
1. Refer to your attachment and machine operator manuals.
2. In North America or Canada, call 1-877-728-8224 and provide
product serial number (if available) and model number.
SERVICE