Denon TU-1510AE User Manual
Page 11
7
ENGLISH
Getting
started
Connections
Operations
Troubleshooting
Specifications
Index
Operations on the remote control unit
1
Press
[MEMORY]
.
• The preset mode is set.
2
Select the preset channel number.
• Press
[SHIFT]
to select the memory block and use
[CHANNEL]
(
1
–
10
) to select the channel number.
• The preset channel number can also be selected using
[PRESET]
(
+
,
–
).
3
Press
[MEMORY]
.
• The station is preset.
Operations
Tuning in radio stations
n
Specify a name for the preset broadcast station
1
Select the station whose name you want to set.
Example: To register “DENON” as the FM station name at
preset channel “A2”.
2
Press
.
3
Turn
to select “Station name”.
4
Press
.
• The station name input mode is set.
5
Either turn
or press
[PRESET]
(
+
,
–
) and select “D”.
6
Press
to set “D”.
• The cursor “__” starts flashing in the next place.
• Repeat steps 5 and 6 to input “E”, “N”, “O” and “N”, in that
order. (Up to 8 characters can be input.)
7
Press
for at least 2 seconds or
press
[MEMORY]
to make preset channel “A2” flash.
• When “__” is flashing, preset channel “A2” can also be made
to flash by pressing
for at least 2 seconds
or by pressing
[MEMORY]
.
8
With channel “A2” flashing, press
PRESET>
or
[MEMORY]
.
• The station name you have input is stored in the memory.
• This procedure can be used to registered station names with
up to 8 digits for up to 100 AM/FM stations at random.
• The 63 characters below can be selected.
• Overwrite a “_” (Space) to erase an inputted character.
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0
1 2 3 4 5 6 7 8 9 [ \ ] ^ _ ! # “ $ % & ’ ( )
*
+ , – . / : ; < = >
? (space)
n
Listening to preset stations
Operations on the main unit
1
Press
.
2
Turn
to select “Search Mode”,
then press the
.
3
Turn
to select “Preset”, then
press the
.
• The preset search mode is set.
4
Turn
to select the preset channel
number.
Operations on the remote control
Select the preset channel number.
• Press
[SHIFT]
to select the memory block and use
[CHANNEL]
(
1
–
10
) to select the channel number.
• The preset channel number can also be selected using
[PRESET]
(
+
,
–
).