General troubleshooting notes, 1) •vtt (1.25v) should be half of vdd (2.5v) – BrightSign HD1010 Hardware User Manual
Page 19
BrightSign Compact
This information applies to a product under development. Its characteristics and specifications are subject to change without notice. Roku assumes no
obligation regarding future manufacturing unless otherwise agreed to in writing.
www.rokulabs.com
© Roku 2008
General troubleshooting notes:
1) •VTT (1.25V) should be half of VDD (2.5V)
This manual is related to the following products: